Sewing Machine Forum - Stitching Together Enthusiasts

Full Version: Sewing a button
You're currently viewing a stripped down version of our content. View the full version with proper formatting.
Sewing a button is a basic sewing skill that can come in handy for repairing clothing or adding decorative elements to your garments.

Here's a step-by-step guide on how to sew a button onto fabric:

Materials You'll Need:

Needle
Thread (matching the fabric or button)
Button
Fabric or garment to attach the button to
Scissors
Straight pins (optional)

Instructions:

Thread the Needle:
Cut a length of thread, usually about 18 inches (45 cm) long.
Thread one end of the thread through the eye of the needle and tie a knot at the other end to secure it.

Position the Button:
Determine the placement of the button on the fabric. If you're replacing a missing button, use the existing buttonhole as a guide. If you're adding a decorative button, use your judgment or a fabric marking pen to mark the button's position.

Prepare the Fabric:
If you're attaching the button to a garment, make sure it's inside out or laid flat with the right side facing down. You may want to use straight pins to temporarily hold the fabric in place.

Start Sewing:
Insert the needle from the backside of the fabric to the front, where you marked the button's position.
Pull the needle through until the knot at the end stops it from going any further.

Attach the Button:
Thread the needle through one of the button's holes from the front to the back. Make sure the button lies flat against the fabric.
Bring the needle back up through the opposite hole of the button, going from the back to the front.

Repeat Stitches:
Continue sewing back and forth through the buttonholes multiple times, making sure the button is securely attached. The number of stitches will depend on the thickness of the fabric and the size of the button, but 4-6 stitches is often sufficient.

Create Shank (Optional):
If the button is meant to fasten something like a shirt or blouse, you may want to create a small space or "shank" between the button and the fabric. To do this, after attaching the button securely, wrap the thread around the base of the button a few times before securing it with a knot on the backside.

Knot the Thread:
Once you've completed the stitches, bring the needle to the backside of the fabric and tie a knot to secure the thread. You can do this by looping the thread around the needle and pulling it tight before cutting off any excess thread.

Finishing:
Trim any excess thread on the backside of the fabric, and your button is securely attached.

Remember to practice this skill, as sewing buttons can be a valuable repair and embellishment technique for clothing and other fabric items.

With a bit of practice, you'll be able to sew buttons neatly and efficiently.