22-09-2023, 12:58 PM
Janome Even Feed Walking foot - Guide for the 4 different categories, (A, B, C, D)
----------------------------------------------------------------------------------------------------------------------------------------------------------------------
Janome Category A walking foot
This category is for low shank machines with an under loading bobbin case
Category A fits the following machines- 1000CS, 1004, 1012A, 1014, 1018S, 1220, 1550, 1560, 1571, 1580, 1585, 1714, 1722, 1780, 2015, 2023, 2039, 2041, 2050, 2070, 2139, 216S, 217S, 2200XT, 3816, 3822, 415, 419S, 423S, 660, CJ14, CJ24, DM21, ENX24, J1012, J1024, J3-18, J3-20, J3-24, PS1024, PS1030, RX18S, SMD500, XR23
----------------------------------------------------------------------------------------------------------------------------------------------------------------------
Janome Category B walking foot
This category is for low shank machines top loading machines.
Category B fits the following machines - 521, 525S, 625E, 659, 2522LE, 4018, 4023, 4035, 4052, 4618, 4623, 5018, 5024, 5030, 5050, 5124, 6019QC, 6125QC, 6260QC, 7025, 8050XL, 8077, BCC-50, CC500, CC1000, CM2200, CP5000/PRO, CXL301, DC3050, DC4030, DC4100, DKS30, DKS100, DXL603, HD2200, Jem Gold/660, Jem Gold2/661, Jem Gold+/661C, JLX2000, JP720, JP760, Jubilee85, MC4800, MC4800QC, MC9400QC, MC5000, MC5200, MC9500QC, MC6500P, MXL50, MyStyle 22/2522, QXL605, SL30X, TXL607, XC50, XL30, XL601, XR33/XC33
----------------------------------------------------------------------------------------------------------------------------------------------------------------------
Janome Category C walking foot
This category is for Top-Loading High Shank Snap-on 7mm Machines
Category C fits the following machines - Atelier 3, MC11000, MC10001, MC10000, MC9700, MC9500, MC9000, MC7700QCP, MC6600P
----------------------------------------------------------------------------------------------------------------------------------------------------------------------
Janome Category D walking foot
This category is for Top-Loading High Shank Snap-on 9mm Machines
Category D fits the following machines - ATELIER 9, ATELIER 7, ATELIER 6, ATELIER 5, CM7P, MC15000, MC14000, MC12000, MC9900, MC9850, MC9450, MC9400, MC8900, MC8200, MC6700P
----------------------------------------------------------------------------------------------------------------------------------------------------------------------
Top tip - Ensure that the walking foot arm that makes the foot move is above your needle bar (the screw that you screw to hold in your needle)
As always, if you need any help or advice, feel free to post within the forum.
----------------------------------------------------------------------------------------------------------------------------------------------------------------------
Janome Category A walking foot
This category is for low shank machines with an under loading bobbin case
Category A fits the following machines- 1000CS, 1004, 1012A, 1014, 1018S, 1220, 1550, 1560, 1571, 1580, 1585, 1714, 1722, 1780, 2015, 2023, 2039, 2041, 2050, 2070, 2139, 216S, 217S, 2200XT, 3816, 3822, 415, 419S, 423S, 660, CJ14, CJ24, DM21, ENX24, J1012, J1024, J3-18, J3-20, J3-24, PS1024, PS1030, RX18S, SMD500, XR23
----------------------------------------------------------------------------------------------------------------------------------------------------------------------
Janome Category B walking foot
This category is for low shank machines top loading machines.
Category B fits the following machines - 521, 525S, 625E, 659, 2522LE, 4018, 4023, 4035, 4052, 4618, 4623, 5018, 5024, 5030, 5050, 5124, 6019QC, 6125QC, 6260QC, 7025, 8050XL, 8077, BCC-50, CC500, CC1000, CM2200, CP5000/PRO, CXL301, DC3050, DC4030, DC4100, DKS30, DKS100, DXL603, HD2200, Jem Gold/660, Jem Gold2/661, Jem Gold+/661C, JLX2000, JP720, JP760, Jubilee85, MC4800, MC4800QC, MC9400QC, MC5000, MC5200, MC9500QC, MC6500P, MXL50, MyStyle 22/2522, QXL605, SL30X, TXL607, XC50, XL30, XL601, XR33/XC33
----------------------------------------------------------------------------------------------------------------------------------------------------------------------
Janome Category C walking foot
This category is for Top-Loading High Shank Snap-on 7mm Machines
Category C fits the following machines - Atelier 3, MC11000, MC10001, MC10000, MC9700, MC9500, MC9000, MC7700QCP, MC6600P
----------------------------------------------------------------------------------------------------------------------------------------------------------------------
Janome Category D walking foot
This category is for Top-Loading High Shank Snap-on 9mm Machines
Category D fits the following machines - ATELIER 9, ATELIER 7, ATELIER 6, ATELIER 5, CM7P, MC15000, MC14000, MC12000, MC9900, MC9850, MC9450, MC9400, MC8900, MC8200, MC6700P
----------------------------------------------------------------------------------------------------------------------------------------------------------------------
Top tip - Ensure that the walking foot arm that makes the foot move is above your needle bar (the screw that you screw to hold in your needle)
As always, if you need any help or advice, feel free to post within the forum.